High Beam Bulb

High Beam Bulb

• The following figures show the replacement of the left headlamp bulb.


• Turn off the ignition and all electrical consumers.

• Remove the key.

Removal

- Remove the cap - 1 -.






- Release and disconnect the harness connector - arrow -.






- Push the spring clip - 2 - in - direction of arrow - under the tabs - 1 - and open the spring clip - 2 -.






- Remove the left high beam headlamp bulb (M30) - 1 - from the headlamp.






Bulb: H7U 12V, 55 W

Installation


• Do not touch the glass of the light bulb, when installing. Your fingers will leave traces of grease on the glass which, when the light is switched on, will evaporate and cloud the glass.

• When installing cap, ensure proper seating. It is destroyed by entry of water into headlamp.

Installation is performed in the reverse order of removal. Note the following:

- Insert the left high beam headlamp bulb (M30) - 1 - into the headlamp - arrows -.






- Check headlamp for functions.

- Check and adjust the headlamp adjustment.