Reverse Shaft

Reverse Shaft

Special tools, testers and auxiliary items required

• Thrust Tube (VW 454)

• Thrust Pad (VW 447 H)

• Punch (VW 411)

• Centering Mandrel (12 - 551)

• Thrust Place (VW 401)

• Punch (VW 408 A)

• Kukko Extractor 14.5-18.5 mm (21/2)

• Kukko Support (22/1)

• Always replace the needle sleeve after removing it from the clutch housing or from the reverse shaft support.





1 Clutch Housing

2 Needle Sleeve

• Removing, refer to.

• Installing, refer to.

3 Reverse Gear

4 Lock Ring

• Always replace after removing.

5 Reverse Gear

• Remove before replacing the lock ring.

• Collar faces reverse gear.

6 Reverse Shaft

• Removing, refer to => [ Transmission ] Transmission.

7 Needle Sleeve

• Removing, refer to.

• Installing, refer to.

8 Reverse Shaft Support

• Removing and installing, refer to => [ Transmission ] Transmission.

Removing the Needle Sleeve from the Clutch Housing





A Counter-support, for example, (22/1)
B Internal puller 14.5 to 18.5 mm, for example, (21/2)

• The needle sleeve will get damaged when it removed and must be replaced.

Installing the Needle Sleeve - A - into the Clutch Housing





Removing the Needle Sleeve from the Reverse Shaft Support





Installing the Needle Sleeve into the Reverse Shaft Support