Fixed Door Window With Window Guide

Fixed Door Window with Window Guide

• When removing and installing door window, spreader pin and spreader plug are also accessible from outside when outer door panel has been removed.

Removing

- Remove outer door panel. Refer to=> [ Outer Door Panel ] Outer Door Panel.

- Remove door window. Refer to => [ Door Window ] Door Window.

- Pull window guide - 4 - out of center bar - 1 - and guide window guide inward.





- Remove bolts - 2 - and - 3 - and slide center bar - 1 - downward - arrow A -.

- Remove center bar - 4 - from seal of fixed door window - arrow B -.

- Disengage window guide - 1 - with fixed door window - 2 - on inside and outside all around from window frame - 4 -.





- Using release tool (T10236), disengage retaining tab on guide pin - 3 - in window frame - 4 -.

With Window Guide Trim Molding

Remove the window guide trim molding - 4 -. Refer to => [ Window Guide Trim Molding ] Window Guide Trim Molding.

All Vehicles

- Remove complete window guide - 1 - with fixed door window - 2 - from window frame - 3 - in - direction of arrow -.





Installing

Installation is performed in the reverse order of removal.

Tightening specification for bolts - 2 - on center bar: 5.5 Nm





Tightening specification for bolt - 3 - on center bar: 4.5 Nm

• While installing fixed door window with window guide, make sure it is seated evenly (wind noise).