Diagram 645/7 (Tracks 71-84)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Camshaft Position (CMP) Sensor, Diesel Direct Fuel Injection (DFI) Engine Control Module (ECM), in plenum chamber, center, Pump/Injector Valves





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

G40 - Camshaft Position (CMP) Sensor Locations

J248 - Diesel Direct Fuel Injection (DFI) Engine Control Module (ECM), in plenum chamber, center Locations

N240 - Pump/Injector Valve, (cylinder 1) 1.9L TDI BEW

N241 - Pump/Injector Valve, (cylinder 2) 1.9L TDI BEW

N242 - Pump/Injector Valve, (cylinder 3) 1.9L TDI BEW

N243 - Pump/Injector Valve, (cylinder 4) 1.9L TDI BEW

T3s - 3-Pin Connector, in engine compartment, front

T8k - 8-Pin Connector, on left (cylinder head

T60 - 60-Pin Connector

(250) - Ground connection in wiring harness engine pre-wiring - Diesel

(D140) - Connection (injectors), in wiring harness, engine pre-wiring

Previous Diagram 645/6 (Tracks 57-70)

Next Diagram 645/8 (Tracks 85-98)