Diagram 645/9 (Tracks 99-112)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Diesel Direct Fuel Injection (DFI) Engine Control Module (ECM), in plenum chamber, center, EGR Vacuum Regulator Solenoid Valve, Wastegate Bypass Regulator Valve, Exhaust Gas Recirculation (EGR) Cooler Switch-over Valve, Intake Flap Motor





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

J248 - Diesel Direct Fuel Injection (DFI) Engine Control Module (ECM), in plenum chamber, center Locations

N18 - EGR Vacuum Regulator Solenoid Valve Locations

N75 - Wastegate Bypass Regulator Valve Locations

N345 - Exhaust Gas Recirculation (EGR) Cooler Switch-over Valve 1.9L TDI BEW

T6l - 6-Pin Connector, in engine compartment, front

T10c - 10-Pin Connector, in engine compartment, left

T14 - 14-Pin Connector

T60 - 60-Pin Connector

T94 - 94-Pin Connector

V157 - Intake Flap Motor 1.9L TDI BEW

(607) - Ground Connection (in left plenum chamber)

(D103) - Connection 3 (in engine compartment wiring harness)

(E30) - Connection (87a) (in engine wiring harness)

Previous Diagram 645/8 (Tracks 85-98)

Next Diagram 645/10 (Tracks 113-126)