Small Trim Lid Module Assembly Overview

Pillar and Side Trims, Convertible

Small Trim Lid Module Assembly Overview





1 - Trim Panel (Upper Part)

• Paint with the vehicle color

2 - Bolt

• Quantity: 5

• 3 Nm

• To remove and install the lid module, screw the side trim bolts out/in. Also observe the information regarding the side trim (convertible) during removal and installation, refer to => [ Side Trim ] Pillar and Side Trims, Convertible.

3 - Small Roof Lid

• Removing and installing, refer to => [ Small Roof Lid ] Pillar and Side Trims, Convertible

4 - Small Trim

• Paint with the vehicle color

• Removing, refer to => [ Large and Small Trim ] Pillar and Side Trims, Convertible.

• Adjusting, refer to => [ Large and Small Trim, Adjusting ] Large and Small Trim, Adjusting

5 - Large Trim

• Paint with the vehicle color

• Removing, refer to => [ Large and Small Trim ] Pillar and Side Trims, Convertible.

• Adjusting, refer to => [ Large and Small Trim, Adjusting ] Large and Small Trim, Adjusting

6 - Emergency Release

• Only for convertibles with power convertible top

7 - Large Roof Lid

• Removing and installing, refer to => [ Large Roof Lid ] Pillar and Side Trims, Convertible

8 - Bolt

• Quantity: 3

9 - Pressure Rod

• Removing and installing, refer to => [ Pressure Rod ] Pillar and Side Trims, Convertible

10 - Flap Servomotor

• Removing and installing, refer to => [ Small Lid Servomotor ] Pillar and Side Trims, Convertible

11 - Lever

• Removing and installing, refer to => [ Lever ] Pillar and Side Trims, Convertible

12 - Lid Module Main Frame

• Suitable for all components listed here.

13 - Release Cable

• Removing and installing, refer to => [ Release ] Pillar and Side Trims, Convertible