Radio

Radio

Special tools, testers and auxiliary items required

• Radio Removal Tool (T10057)

CAUTION!
Prior to working on the electrical system:

• Obtain the radio system anti-theft code.

• Switch off all electrical consumers.

• Switch off the ignition and remove the ignition key.

• Get the radio code from the customer before removing the radio. Deactivate the anti-theft protection when replacing the radio. Refer to => [ Anti-Theft Coding, Activating ] Programming and Relearning. Tell the customer the new radio code.

• The part number for the radio is on a label on the radio housing.

Removing

- If there is an MC/CD still in the radio, remove it. Refer to the Operating Instructions.

- Insert two clips on (T10057) in release slits on radio until they engage. Points on the grip eyelets of tool face outward.





- Remove the radio from the instrument panel at the (T10057 ) grip eyes.

- Remove the (T10057) by pressing the locking tabs on the radio.

- Disconnect all harness connectors on the radio.

Installing

- Connect harness connectors.

- Push the radio straight into the instrument panel until it engages.

• During installation ensure that the lines are not pinched between the instrument panel and the radio housing and become damaged.