Parallel Movement, Adjusting

Sunroof

Parallel Movement, Adjusting

• The parallel movement adjustment can only be performed with drive motor removed and glass panel (in zero position).

- Removing drive motor for sunroof. Refer to=> [ Sunroof Drive Motor ] Sunroof.

Marking - arrow - on upper part of rear guide - 1 - must be located on both sides between markings - dimension a - at link guide - 2 -.





Link guide - 2 - must be engaged in guide rail (cannot be moved by hand).

- Slide upper part of guide - 1 - only from front toward rear center, between markings.

- Install drive motor (zero position) in this position.

Then check zero position.