Diagram 634/4 (Tracks 29-42)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


ABS control module (w/EDL)





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

F - Brake Light Switch ABS - Electrical and Electronic Component Locations - EDL/ASR

J104 - ABS Control Module (w/EDL), in engine compartment, left ABS - Electrical and Electronic Component Locations - EDL/ASR

J220 - Motronic Engine Control Module (ECM) Locations

J256 - Convertible Top Control Module Electric and Hydraulic Convertible Top Assembly Overview

N133 - Right Rear ABS Inlet Valve

N134 - Left Rear ABS Inlet Valve

N135 - Right Rear ABS Outlet Valve

N136 - Left Rear ABS Outlet Valve

T4y - 4-Pin Connector, at F

T16 - Data Link Connector (DLC), below instrument panel, left

T26 - 26-Pin connector, connector B, black, on J256

T47a - 47-Pin Connector, on ABS Control Module

T121 - 121-Pin Connector

V64 - ABS Hydraulic Pump ABS - Electrical and Electronic Component Locations - EDL/ASR

(A76) - Connector (K-diagnosis wire) in instrument panel wiring harness

(A121) - Connection (high bus), in instrument panel wiring harness

(A122) - Connection (low bus), in instrument panel wiring harness

(B131) - Connection (54) (in interior wiring harness)

(J3) - Connection 1 (in ABS wiring harness)

Previous Diagram 634/3 (Tracks 15-28)

Next Diagram 634/5 (Tracks 43-56)