Diagram 631/2 (Tracks 1-14)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Starter, Voltage Regulator (VR), Load Reduction Relay, Fuses (on battery fuse holder)





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

A - Battery

C - Generator (GEN)

C1 - Voltage Regulator (VR)

G263 - Evaporator Vent Temperature Sensor Heating and A/C Engine Compartment Overview

J59 - Load Reduction Relay

J220 - Motronic Engine Control Module (ECM) Locations

J285 - Instrument Cluster Control Module

S163 - Fuse 2 (30) on battery fuse holder

S164 - Fuse 3 (30) on battery fuse holder

S176 - Fuse 4 (30) on battery fuse holder

S177 - Fuse 5 (30) on battery fuse holder

T4 - 4-Pin Connector, in engine compartment, left

T10j - 10-Pin Connector

T32 - 32-Pin Connector on J285

T121 - 121-pin connector, on J220

(42) - Ground Connection (beside steering column)

(49) - Ground Connection (near steering column)

(81) - Ground Connection 1 (in instrument panel wiring harness)

(500) - Threaded Connection 1, terminal 30 (on relay panel)

(502) - Threaded Connection 1 - terminal 30a (on relay panel)

Next Diagram 631/3 (Tracks 15-28)