Transmission Housing and Shift Mechanism Assembly Overview

Transmission Housing and Shift Mechanism Assembly Overview





1 Countersunk screw, 25 Nm

2 Flanged shaft with compression spring

• Removing and installing => [ Removal and Installation ] Table of Contents.

• Assembling => [ Differential ] Differential.

3 Internal Torx bolt, 25 Nm

• For reverse gear shaft support

• Self-locking

• Always replace

4 Internal Torx bolt, 30 Nm

• For reverse gear shaft support

• Self-locking

• Always replace

5 O-ring

• Always replace

6 Pivot pin

7 Bolt, 25 Nm

8 Bolt, 25 Nm

9 Sealing cap

10 Multi point socket head bolt, 25 Nm

• For reverse gear shaft support

• Always replace

11 Transmission housing

• Servicing => [ Transmission and Clutch Housing ] Transmission and Clutch Housing.

12 Clutch housing

• Servicing => [ Transmission and Clutch Housing ] Transmission and Clutch Housing.

13 Hex bolt, 25 Nm + an additional 90° (1/ 4 turn)

14 Shift mechanism

• Servicing => [ Shift Mechanism ] Shift Mechanism.

15 Multi point socket head bolt, 25 Nm