Air Cleaner Housing: Locations

Engine Cover/Air Filter, Assembly Overview







NOTE: Components marked with * are tested via On Board Diagnostic (OBD), Diagnostic mode 3: Check DTC memory.

1 - Mass Air Flow (MAF) Sensor -G70-*
- Terminals are gold-plated
- 5-pin connector
2 - 3 Nm
3 - Upper section of air filter/engine cover
- Removing and disassembling air filter/engine cover.
4 - Spring clip
5 - Intake air guide
- Check for secure fitting
6 - Filter element
7 - Lower part of air filter
- Removing and disassembling air filter/engine cover.
8 - 3 Nm
9 - Heat shield
10 - Rubber boot
- Replace if damaged
- Note installation marking
11 - Intake hose
- Check for secure fitting
- Note installation marking