Emblems, Adaptive Cruise Control

Emblems On Vehicles With Adaptive Cruise Control, Removing And Installing

Removing
Retaining ring - 3 - is only installed on Highline version.







- Release upper catches on back side of emblem - 4 - with radiator grille removed - 1 -.
- Remove emblem - 4 - with lower catches - arrow a - from retaining ring - 3 - or radiator grille - 1 -.
- To remove retaining ring - 3 -, both catches - arrow b - in radiator grille - 1 - must be released.

Installing

NOTE: Before installing emblems, see notes about Adaptive Cruise Control Sensor -G550- - 2 -.

Highline version







- Press retaining ring - 3 - into radiator grille - 1 - until both catches engage - arrow b -.

All versions
- Place emblem - 4 - with lower catches - arrow b - in recesses in retaining ring - 3 - or corresponding recesses in radiator grille - 1 -.
- Press emblem - 2 - with upper catches into retaining ring - 3 - or radiator grille - 1 - until catches engage.