Diagram 2/10 (Tracks 113-126)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Instrument Cluster, Data Bus On Board Diagnostic Interface, Lamp Failure Indicator Lamp, Data Link Connector (DLC)





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

H3 - Warning Buzzer

J285 - Instrument Cluster Control Module Control Modules in Interior

J519 - Vehicle Electrical System Control Module Control Modules in Interior

J533 - Data Bus On Board Diagnostic Interface Control Modules in Interior

K65 - Left Turn Signal Indicator Lamp

K94 - Right Turn Signal Indicator Lamp

K118 - Brake System Warning Lamp Anti-lock Brake System w/ EDL/ASR/ESP

K170 - Lamp Failure Indicator Lamp

SB - Fuse Panel B

SC7 - Fuse 7 (on fuse panel C)

T8t - 8-Pin Connector, black

T11a - 11-Pin Connector, brown

T16d - 16-Pin Connector, Data Link Connector (DLC)

T20e - 20-Pin Connector

T36 - 36-Pin Connector

(400) - Ground Connection 35 (in main wiring harness)

(639) - Ground Connection (on left A-pillar) Overview of Ground Connections in Interior

(B288) - Plus Connection 12 (15a) (in main wiring harness)

(B397) - Comfort System CAN-Bus High Connection 1 (in main wiring harness)

(B406) - Comfort System CAN-Bus Low Connection 1 (in main wiring harness)

* - Position of fuses depends on equipment, see component locations

** - Through May 2005

*** - From May 2005

Previous Diagram 2/9 (Tracks 99-112)

Next Diagram 2/11 (Tracks 127-140)