Ribbed Belt

Ribbed Belt

Special tools, testers and auxiliary items required

• Connecting Pin (T10027)

Removing

- Remove the engine cover.

- Remove the noise insulation.

- Mark the running direction of the ribbed belt before removing.

- Using a wrench - 1 - on the tensioner bolt, rotate the tensioner in the - direction of the arrow - far enough until (T10027) can be installed in the tensioner.





- Remove the ribbed belt.

Installing

• Before installing the ribbed belt, make sure that all ancillaries (alternator, Air Conditioning (A/C) compressor) are secured.

• Check the pulleys for ease of movement

• Ribbed belt must not be kinked.

• Note previously marked direction of belt rotation and be sure that it is seated correctly on the pulleys.

- Install the ribbed belt as shown.

- Rotate the tensioner slightly in the- direction of the arrow - using a wrench - 1 -. This releases tension on the (T10027) in tensioner and it can be removed.





Once the work is completed:

- Start the engine and check the belt running.