Headlamp Washer Pump: Service and Repair

Headlamp Washer Pump (V11)

Headlamp Washer Pump is installed at tank for windshield washing system and headlamp cleaning system in right wheel housing.

Removing:





- Switch ignition and all electrical consumers off and disengage the key or ignition switch in position 0 (ignition off).

- Remove front bumper cover.

- Disconnect harness connector - 1 - and pull pump - 2 - upward out of tank.

- If necessary, save the drained washer fluid in a suitable container.

Installing:

Install in reverse order of removal, noting the following:

- Bleed headlamp washer system after completing assembly work, refer to => [ Headlamp Washer System, Bleeding ] Headlamp Washer System, Bleeding.