Rear Axle Overview

All Wheel Drive (AWD)

Rear Axle Overview

• Welding and straightening work on supporting or wheel carrying components of suspension is not permitted.

• Always replace self-locking nuts.

• Always replace corroded bolts/nuts.

• Bonded rubber bearings can only be turned to a limited extent. Therefore, only tighten bolts on components with bonded rubber bushings when wheel bearing housing is lifted (curb weight position). Refer to => [ Rear Axle in Curb Weight Position ].

• Always replace bonded rubber bushings on both sides of vehicle.





I - Refer to => [ Subframe and Final Drive Assembly Overview ].

II - Refer to => [ Transverse Link and Tie Rod Assembly Overview ].





III - Refer to => [ Wheel Bearing Housing and Trailing Arm Assembly Overview ].

IV - Refer to => [ Shock Absorber and Coil Spring Assembly Overview ].

IV - Refer to => [ Shock Absorber Assembly Overview, AWD ] Shock Absorber Assembly Overview, AWD.

V - Refer to => [ Stabilizer Bar Assembly Overview ].