CD Changer

Radio, Multimedia, Navigation

CD Changer

Special tools, testers and auxiliary items required

• Radio Removal Tool (3316)

Removing

• CD changer is installed under the foldable center armrest.

Before starting repair work, perform the following:

- Switch off ignition, switch off all electrical consumers and remove ignition key.

- Open foldable center armrest completely.

- If necessary, remove CDs remaining in CD changer. Refer to => Owner's Manual.

- Slide radio removal tools (3316) into slots designed for them on CD changer at left and right until they engage audibly.

- Pull out CD changer using radio removal tools - arrows -.





- Disengage harness connector at points designated with - arrows - and disconnect it.





- Press on retaining clamp - arrow - and pull out radio removal tools from removed unit.





Installing

Install in reverse order of removal.