DVD Player

Radio, Multimedia, Navigation

DVD Player

Special tools, testers and auxiliary items required

• Release Tool (T10315)

Removing

- Open folding center armrest.

- Press button - arrow - and fold control unit on DVD player up.





- Remove control unit from DVD player.

- Unclip frame with a suitable screwdriver at areas marked with - arrows - and remove.





- Insert release tools (T10315) in DVD player - arrows -.





• Release tools must be inserted so that thicker part on lower end of tool - A - faces toward DVD player housing. Otherwise, the catch spring on DVD player cannot be pressed correctly with release tool.





- Move release tools sideways - arrows - so that nut in the release tools catches behind tab on DVD player.





- Now pull DVD player out of installation frame with both release tools.

- Release connector - arrow - on back side of DVD player and remove.





Installing

- Place DVD player on rubber buffer - arrow -. Place DVD player wiring connection on connector - A -.





- Carefully slide DVD player into frame in center console until it audibly engages.

- The rest of the installation is performed in the reverse order.

- Finally, check multimedia system for functionality.

DVD player is installed in storage bin in center console below foldable armrest.