Rear Lid

Rear Lid

Removing





- Open rear lid - 1 -.

- Remove rear lid trim

- Disconnect connectors on electrical components present and remove rear window washer system hose.

- Guide lines and hose through opening.

- Loosen bolts - 3 - at left and right lid hinges - 4 - (do not unscrew completely).

A second technician is required for the rest of the removal procedure.

- Remove left and right gas struts - 2 - at hood - 1 - => [ Gas Strut ] Removal and Replacement

- Only now remove screws - 3 - and remove rear lid - 1 -.

Installing

To install, perform the steps used for removal in reverse order.

- Rear lid screw specification specification: 10 Nm.

- Rear lid, adjusting => [ Rear Lid, Adjusting ] Adjustments

• Before the rear lid is closed, a function test of the unlocking components must be performed.