Diagram 121/2 (Tracks 1-14)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Magnetic Field Sensor for Compass, Multi-function Indicator





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

A - Battery

B - Starter

C - Generator (GEN)

G197 - Magnetic Field Sensor for Compass Radio / Navigation And Antenna Systems Overview

J119 - Multi-function Indicator

J285 - Instrument Cluster Control Module

J519 - Vehicle Electrical System Control Module

J533 - Data Bus On Board Diagnostic Interface

SA5 - Fuse 5 (on fuse panel A) Overview Of Fuses (SA), (SB)

SC13 - Fuse 13 (on fuse panel C) Overview Of Fuses (SC) And Circuit Breaker

T6ar - 6-Pin Connector

T16 - 16-Pin Connector, under instrument panel, left, Data Link Connector (DLC)

T20 - 20-Pin Connector

T36 - 36-Pin Connector

(369) - Ground Connection 4 (in main wiring harness)

(431) - Ground Connection 2 (in roof wiring harness)

(662) - Ground Connection (on left rear C-pillar) Overview of Ground Connections In Luggage Compartment

(508) - Threaded Connection terminal 30 (on electronics box)

(A167) - Plus Connection 3 (30a) (in instrument panel wiring harness)

(A178) - Infotainment High-Bus Connection (in instrument panel wiring harness)

(A179) - Infotainment Low-bus Connection (in instrument panel wiring harness)

(B169) - Plus Connection 1 (30) (in interior wiring harness)

(B397) - Comfort System CAN-Bus High Connection 1 (in main wiring harness)

(B406) - Comfort System CAN-Bus Low Connection 1 (in main wiring harness)