Ribbed Belt Pulley without Freewheel

Ribbed Belt Pulley without Freewheel

Special tools, testers and auxiliary items required

• Socket (VAS 3310)

• Torque Wrench (V.A.G 1332)

Removing

- Remove generator.

- Tighten the generator in a vise at the attachment points.

- Use socket insert (VAS 3310) to remove mounting nut of overrunning clutch pulley from generator shaft.





Installing

Install in reverse order of removal, noting the following:

- Tighten M10 ribbed belt pulley nut to generator shaft to 65 Nm.