Steering Column Electronic Systems Control Module J527 On Board Diagnostic (OBD), Functions

Steering Column Electronic Systems Control Module J527 On Board Diagnostic (OBD), Functions

Removing and installing Steering Column Electronic Systems Control Module J527

Steering Column Electronic Systems Control Module J527, coding
- Connect Vehicle Diagnostic, Testing and Information System VAS 5051/5052. Procedures
- Select operating mode "Guided Fault Finding"
- Enter information as prompted and press ">" to confirm.

After the DTC memory of all control modules has been checked:
- Use "Go to" button to select "Function / Component Selection"
- Select "Body"
- Select "Electrical system int/ext"
- Select "01 - Self-diagnosis"
- Select "16- Steering wheel electronics"
- Select "Steering wheel electronics functions"
- Select "Coding control module steering wheel electronics"
- Follow tester prompts

Steering Column Electronic Systems Control Module J527, Output Diagnostic Test Mode (DTM)

- Connect Vehicle Diagnostic, Testing and Information System VAS 5051/5052. Procedures
- Select operating mode "Guided Fault Finding"
- Enter information as prompted and press ">" to confirm.

After the DTC memory of all control modules has been checked:
- Use "Go to" button to select "Function / Component Selection"
- Select "Body"
- Select "Electrical system int/ext"
- Select "01 - Self-diagnosis"
- Select "16 - Steering wheel electronics"
- Select "Steering wheel electronics functions"
- Select "Steering wheel electronics Diagnostic Test Mode (DTM)"
- Follow tester prompts.