RCD 510 Radio System Overview, Rabbit Sedan
RCD 510 Radio System Overview, Rabbit Sedan
1 Multimedia Control Module (J650)
• Installed in center console
• For additional information, refer to => [ Multimedia Control Module ] Multimedia Control Module
• Optional CD changer or multimedia system control module. It is not possible to have both systems together because both systems have the same installation location.
2 CD Changer (R41)
• 6 disc CD changer
• Installed in center console
• Additional information, refer to => [ CD Changer ] CD Changer
• Optional CD changer or multimedia system control module. It is not possible to have both systems together because both systems have the same installation location.
3 Radio (R) (RCD 510)
• Removing and Installing, refer to => [ Radio and Radio Navigation System, Rabbit Sedan ] Communication
• Overview of harness connectors, refer to => [ RCD 510 Radio Connection Overview ] RCD 510 Radio Connection Overview
• Transport protection device, refer to => [ CD Changer Transport Protection Device, Activating/Deactivating ] CD Changer Transport Protection Device, Activating/Deactivating
• Electronic antitheft system, refer to => [ Electronic Antitheft System ] Electronic Antitheft System
4 External Audio Source Connection (R199)
• Installed in the storage compartment under the center armrest
• Additional information, refer to => [ External Audio Source Connection ] External Audio Source Connection
5 Telephone, Navigation and Auxiliary Heater Remote Control Antenna (R66)
• Installed on rear of roof
• Additional information, refer to => [ Antenna ] Antenna
6 Window Antenna
• Installed in the rear window, for radio reception with antenna diversity
• Antenna for digital radio reception, DAB, also optional
• For additional information, refer to => [ Antenna ] Antenna
7 Right Rear Treble Speaker (R16) and Left Rear Treble Speaker (R14)
• Installed in door trim of left and right rear doors
• For additional information, refer to => [ Speaker Systems ] Description and Operation
8 Right Rear Bass Speaker (R17) and Left Rear Bass Speaker (R15)
• Installed in door trim of left and right rear doors
• For additional information, refer to => [ Speaker Systems ] Description and Operation
9 Digital Sound System Control Module (R12)
• Installed under left front seat
• For additional information, refer to => [ Sound System Amplifier ] Description and Operation
10 Right Front Midrange Speaker (R104) and Left Front Midrange Speaker (R103), Right Front Bass Speaker (R23) and Left Front Bass Speaker (R21)
• Installed in door trim of left and right front doors
• Midrange speakers are only installed in conjunction with sound system
• Midrange and bass speakers are installed as one unit.
• Only the bass speaker is installed here when there is no sound system. Midrange frequencies play through the bass and treble speakers.
• For additional information, refer to => [ Speaker Systems ] Description and Operation
11 Right Front Treble Speaker (R22) and Left Front Treble Speaker (R20)
• Installed in triangle window of left and right front doors
• For additional information, refer to => [ Speaker Systems ] Description and Operation
Radio unit is equipped with an electronic Comfort antitheft system which operates in conjunction with the instrument cluster.
After disconnecting the power supply, the radio can be used again after connecting the power supply. The antitheft code does not need to be entered again. The requirement is that the first activation of the electronic antitheft system follows and that the radio is reconnected in the same vehicle.
The antitheft code is transmitted via the vehicle diagnosis, testing and information system (VAS 5051) or the vehicle diagnosis and service system (VAS 5052). The radio card and the label on the radio that were used in the past are no longer used.
• To access the antitheft code the Guided Fault-Finding (VAS 5051) or the Guided Fault-Finding (VAS 5052) "online" must be connected (network connection) and the user must provide a valid program user id to retrieve a radio code.
Antitheft System, Deactivating
Required Special Tools and Equipment
• Vehicle Diagnosis, Testing and Information System ( VAS 5051) or Vehicle Diagnosis and Service System (VAS 5052)
• Diagnostic adapter cable (VAS 5051/5a) or (VAS 5051/6a) or (VAS 5052/3)
Accessing Electronic Antitheft System Code with VAS tester
Select "Guided Functions" in Diagnostic Operation System (VAS 5051) or Vehicle Diagnosis and Service System (VAS 5052).
or
Select "Guided Fault Finding" in Vehicle Diagnosis, Testing and Information System (VAS 5051) or Vehicle Diagnosis and Service System (VAS 5052).
After DTC memory of all control modules has been checked:
- Press button "Jump".
- Select "Function/Component Selection".
- Select "Body".
- Select "Electrical Systems".
- Select "01 self-diagnosis-enabled systems".
- Select "radio or radio navigation system"
- Select "Functions"
- Select and start "radio code inquiry".
An authorization to the system will be requested: Then the operating data, the VIN and the Radio/RNS unit serial number will be automatically read out.
• When installing new radio/radio-navigation unit, or a unit which has not be adapted to the vehicle, it can happen that tester will not be able to read the serial number of the radio / radio-navigation unit. In this case, enter the serial number manually. The serial number can be found on a sticker on the unit and is also stamped into the side of the unit.
Then the radio code will be displayed in the tester.
The radio or radio navigation system antitheft code must now be entered manually.
Deactivating Electronic Antitheft System
- Switch on radio unit.
An input mask with a 10 key key pad, a correction button and an input button appear.
- Enter the correct radio code using the key pad on the input mask.
- Confirm by pressing the input button.
Unit is enabled and ready for operation.
Using the correction button to change an incorrect number.
• If the wrong code number was entered when overriding the electronic lock, first "SAFE" blinks in the display and "1000" appears again. You can now repeat the entire procedure one more time. The number of tries is shown in the display. If you enter the wrong code number again, the unit is locked for about one hour, that is, it cannot be operated. This lock is indicated by the word "SAFE" appearing continuously in the display. After one hour has elapsed in which the unit and the ignition must be switched on, the number of attempts disappears and the electronic lock can be deactivated again as described above. The cycle two tries, locked for one hour still applies.