Link, Removing and Installing

Link, Removing And Installing

NOTE: Always replace guides with cable as a pair.

Removing
- Removing glass panel for sunroof.
- Removing installation unit.
- Remove drive motor for sunroof glass panel.
- Remove slotted guide rail.







- Using a screwdriver, carefully disengage rain channel - 1 - in - direction of arrow - on both sides at bearing on guide retaining tabs - 2 - and remove rain channel.







- Disengage clip mechanism - arrows - of upper end piece - 1 - from lower end piece - 2 - using a screwdriver and pull upper end piece off.







- Slide lower part of rear guide - 1 - in - direction of arrow - in guide rail - 3 - until the lock mechanism of guide catch - 2 - is released.
- Pull lower part of rear guide - 1 - and guide catch - 2 - together in - direction of arrow - out of guide rail - 3 -.

Installing
Installation is performed in the reverse order of removal.