Power Seat Pan

Front Seats

Power Seat Pan

Removal and installation of seat pan is described for left seat frame. Removal and installation of the right seat pan is performed in the same way.

Removal

- Mount the fixture for seat repair (VAS 6136) on the engine and transmission holder (VAS 6095).

- Remove front seat. Refer to => [ Front Seat ] Front Seat

- Attach the seat to the fixture for seat repair (VAS 6136).

- Remove front right seat trim. Refer to => [ Right Seat Trim ] Right Seat Trim

- Remove left power seat trim. Refer to => [ Left Power Seat Trim ] Left Power Seat Trim

- Remove retainer and power seat bracket. Refer to => [ Bracket and Support, Power Seat ] Bracket and Support, Power Seat

- Remove front seat drawer mount. Refer to => [ Seat Drawer Mount ] Seat Drawer Mount

- Remove front seat backrest. Refer to => [ Left Front Seat Backrest ] Left Front Seat Backrest

- Remove cover and upholstery from front seat backrests. Refer to => [ Front Seat Pan Covers and Upholstery ] Front Seat Covers and Upholstery

- Remove screws - 1 - and - 2 - on right side.

- Remove screw - 3 - in rear area.

• Screw - 3 - in installation position points from inside toward outside.

- Remove screw - 4 - in front area.

- Remove seat pan - 5 - from longitudinal adjuster - 6 -.





Installation

- To install, perform the steps used for removal in reverse order.

If the present seat pan is replaced, new part is a "Sportline" seat pan. If this seat pan in installed in a vehicle with a different equipment type, bracket - 1 - and - 2 - must be removed.

To avoid contamination, seat tracks - 3 - and - 4 - must be covered with a cloth when removing brackets - 1 - and - 2 -.