Coolant Fan V7 and Coolant Fan 2 V177, Removing and Installing

Coolant Fan V7 and Coolant Fan 2 V177, removing and installing

Removing
- Remove noise insulation.
- Unclip lower coolant hose from intake air elbow.





- Disconnect electrical harness connector - 1 - and remove mounting bolts of intake air elbow - arrows -.
- Remove air intake elbow downward.





- Disconnect electrical harness connector - 1 - and lay cable free. Installation position of harness connector deviates from the illustration.
- Remove nuts - arrows - and remove fans.

Installing
Installation is in reverse order of removal. Note the following:

Tightening torques: