Headlamps

Headlamps

Removing

Headlights, removing and installing, GTI and R32. Refer to=> [ Headlamps, without Headlamp Washer System, GTI ] .

• It is not necessary to disconnect battery.

• To remove headlamps, front bumper must not be removed.

• Illustrations depict removal and installation of left headlamp.

• If one headlamp is removed, it must always be adjusted after installation.

• Should an HID headlamp be removed, perform basic setting after installation

- Switch off ignition, switch off all electrical consumers and remove ignition key.

- Release and disconnect electrical connection - arrow -.





- Remove radiator grille.

- Remove front bumper strip Removal and Installation.

- Remove mounting bolt - arrow - at lower left of headlamp.





- Remove mounting bolt - arrow - at lower right of headlamp.





- Remove screws - arrow - at top of headlamp.





- Remove headlamp from body cutout.

Installing

Install in reverse order of removal, noting the following:

- Tighten the headlamp mounting bolts to the specification. Refer to=> [ Specifications ] Specifications.

- Check installation position of headlamp for uniform gap dimensions.

If headlamp has an uneven gap dimension to the body, installation position must be corrected. Refer to=> [ Headlamps, Correcting Installation Position ] Headlamps, Correcting Installation Position.

- Check headlamp for function.

• If one headlamp is removed, it must always be adjusted after installation.

- Check headlamp adjustment and adjust headlamp if necessary