Diagram 139/16 (Tracks 197-210)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Engine Control Module (ECM), Clutch Position Sensor





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

F125 - Multi-Function Transmission Range (TR) Switch Locations

G476 - Clutch Position Sensor 2.5L BGP, BGQ, CBUA And CBTA

J104 - ABS Control Module Control Modules in Front Part of Vehicle

J519 - Vehicle Electrical System Control Module

J623 - Engine Control Module (ECM), in plenum chamber, center Control Modules in Front Part of Vehicle

T5m - 5-Pin Connector

T10q - 10-Pin Connector, on transmission

T26a - 26-Pin Connector, on ABS with EDL Control Module

T47 - 47-Pin Connector, on ABS with EDL/ESP Control Module

T47a - 47-Pin Connector, on ABS with ESP Control Module (Hydraulic Brake Booster)

T121 - 121-Pin Connector

(43) - Ground Connection (on right lower A-pillar) Overview of Ground Connections In Interior

(367) - Ground Connection 2 (in main wiring harness)

(374) - Ground Connection 9 (in main wiring harness)

(382) - Ground Connection 17 (in main wiring harness)

(605) - Ground Connection (on upper steering column) Overview of Ground Connections In Interior

(B383) - Powertrain CAN-Bus High Connection 1 (in main wiring harness)

(B390) - Powertrain CAN-Bus Low Connection 1 (in main wiring harness)

* - Only models with manual transmission

*** - Only models with 6-speed automatic transmission 09G

Previous Diagram 139/15 (Tracks 183-196)

Next Diagram 139/17 (Tracks 211-224)