Operation CHARM: Car repair manuals for everyone.

Diagram 139/8 (Tracks 85-98)






IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Engine Control Module (ECM), Ignition Coil 5 with Power Output Stage, Ignition Coil, Throttle Valve Control Module





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

G186 - Throttle Drive (for Electronic Power Control (EPC) Locations

G187 - Throttle Drive Angle Sensor 1 (for Electronic Power Control (EPC) Locations

G188 - Throttle Drive Angle Sensor 2 (for Electronic Power Control (EPC) Locations

J338 - Throttle Valve Control Module Locations

J519 - Vehicle Electrical System Control Module

J623 - Engine Control Module (ECM), in plenum chamber, center Control Modules in Front Part of Vehicle

T6x - 6-Pin Connector

T14a - 14-Pin Connector, near battery

T121 - 121-Pin Connector

(85) - Ground Connection 1 (in engine compartment wiring harness)

(220) - Sensor Ground Connection (in engine compartment wiring harness)

(281) - Ground Connection 1 (in engine wiring harness)

(642) - Ground Connection (on electronic fan control) Overview of Ground Connections In Engine Compartment

(D206) - Connection 4 (87a) (in engine wiring harness)

Previous Diagram 139/7 (Tracks 71-84)

Next Diagram 139/9 (Tracks 99-112)