Interior Monitoring and Vehicle Inclination Deactivation Switch, from 12.06

Interior Monitoring and Vehicle Inclination Deactivation Switch, from 12.06

Interior Monitoring Deactivation Switch (E267) and Deactivate Vehicle Inclination Sensor Button (E360), from 12/06, removing and installing

From 12/06 (model year 2007), the "interior monitoring deactivation " and "deactivate vehicle inclination sensor" have been combined into one button with one symbol.

Special tools, testers and auxiliary items required

• Trim removal wedge (VAS 3409)

CAUTION!
When removing and installing components in a visible area (switches, covers, trim, etc.), mask off the areas at which a prying tool (trim removal wedge (VAS 3409), screwdriver) will be positioned, using commercially available adhesive tape.

• To remove the Interior Monitoring Deactivation Switch (E267) and Deactivate Vehicle Inclination Sensor Button (E360), anti-theft warning system must be deactivated.

• The Interior Monitoring Deactivation Switch (E267) and Deactivate Vehicle Inclination Sensor Button (E360) comprise one component.

• Interior Monitoring Deactivation Switch (E267) and Deactivate Vehicle Inclination Sensor Button (E360) are located in B-pillar trim on driver's side.

Removing

- Switch off ignition, switch off all electrical consumers and remove ignition key.

- Carefully pry up button - 1 - using Trim Removal Wedge (VAS 3409) or screwdriver.





- Release and disconnect connector - arrow - and remove it from button.





Installing

Install in reverse order of removal.