Rear Door Cover Strip

Moldings and Trim


Rear Door Cover Strip

Removing

• On vehicles with fender flares, the fender flares on rear door must be removed.





- Pry out cover cap - 2 - from inside of door.

- Remove the bolt - 3 -.

- Pull door cover strip - 1 - rearward - direction of arrow 7 - and then off of door - direction of arrow 8 -.

Installing

• Before installing, check all the fasteners for damage and replace them if necessary.

- Lower edge of door cover strip - 1 - must be installed first and then pushed forward.

- Then, press cover strip onto door and install bolts.