Subframe Bonded Rubber Bushing, Rear

Subframe Bonded Rubber Bushing, Rear

Removing

- Install tools as shown in the illustration.





1. Press piece (T10301/5)

2. Support ring (T10301/8)

3. Tube (T10301/3)

4. Hydraulic press (VAS 6178) with pressure head (T10205/13)

5. Nut (T10301/2)

6. Spindle (T10301/1)

- Press out bonded rubber bushing.

CAUTION!
Secure hydraulic cylinder (VAS 6178) while pressing out.

Installation position

One of the arrows - 1 - must point in direction of travel





Installing

- Install tools as shown in the illustration.





1. Press piece (T10301/7)

2. Bonded rubber bushing

3. Thrust pad (T10301/6)

4. Hydraulic press (VAS 6178) with pressure head (T10205/13)

5. Nut (T10301/2)

6. Spindle (T10301/1)

- Press in bonded rubber bushing until shoulder lies gap free at subframe sleeve.

- Mount subframe to body. Refer to --> [ Mount subframe on body and remove (second mechanic required). ] Subframe Servicing.