Engine Lubrication: Locations

Oil pan, assembly overview

Oil pan (lower section), assembly overview

Oil pan (lower section), assembly overview:

1 - 8 Nm
2 - 8 Nm
3 - Oil Level Thermal Sensor G266
4 - Seal
^ Replace

5 - Oil drain plug, 30 Nm
^ If sealing ring is leaking cut open and replace.

6 - Oil pan, lower section
^ Clean sealing surface before installing
^ Insert with sealant AMV 176 501

7 - Oil tube
8 - 8 Nm
9 - O-ring
^ Replace

Oil pan (upper section), assembly overview

Oil pan (upper section), assembly overview:

1 - 8 Nm
2 - 8 Nm
3 - Oil tube
4 - Oil pan (upper section)
^ Clean sealing surface before installing
^ Insert with sealant AMV 176 501
^ Note internal oil lines

5 - 10 Nm
6 - Baffle
7 - Cylinder block





Oil lines in upper section of oil pan
- Insert oil lines - A - as shown in illustration and tighten bolts - B - to 8 Nm.