Engine: Locations

Components in engine valley, assembly overview

Components in engine valley, assembly overview:

1 - Input hub
2 - 8 Nm
3 - Clutch
^ Phased in introduction of a torsion elastic clutch

4 - 50 Nm plus an additional 1/4 turn (90°)
^ Replace

5 - 20 Nm
6 - Generator
7 - Oil filter housing, upper section
8 - Coolant connection
^ With Engine Coolant Temperature (ECT) Sensor G62

9 - Gasket
^ Replace

10 - Seal
^ Replace

11 - 20 Nm plus an additional 1/4 turn (90°)
^ Replace

12 - Oil filter housing, lower section
^ With coolant thermostat housing

13 - Cover
14 - Noise insulation
^ Installation not necessary

15 - Bypass flap with cooler for Exhaust Gas Recirculation (EGR)

16 - Fuel filter
^ For vehicles with engine code BKW

17 - Alignment bushing
^ Secure with commercially available grease, if necessary, before installation