Torque Specifications

Torque Specifications

Torque specifications:

Cylinder Head Bolts





Always replace cylinder head bolts
All cylinder head bolts except number 1, 2, 17 and 19 in tightening sequence must be installed with notched washers
First pass 30 Nm
Second pass 60 Nm
Third pass 1/2 additional turn (180°)
Final pass 1/2 turn (180°)

Camshaft Bearing Cap Bolts
Please refer to Camshaft, Removing and Installing for tightening specifications and procedure.

Crankshaft Main Bearing Bolts

Tightening main bearing bolts:

(- arrow - points in driving direction)
First pass 35 Nm
Second pass 65 Nm
Final pass 1/2 additional turn (180°)

Connecting Rod Bolts 60 Nm plus an additional 1/4 turn (90 °)
Replace

Vibration Damper Bolts 50 Nm plus an additional 1/4 turn (90°)

Drive Plate Bolts
First pass: Tighten new bolts 30 Nm
Final pass 50 Nm & turn an additional 1/4 turn (90°) (additional rotation may occur in several stages)

Oil Pump Mounting Bolts 20 Nm plus an additional 1/4 turn (90°)

Coolant Pump Bolts 20 Nm plus an additional 1/4 turn (90°)





Coolant Pump Cover Bolts 8 Nm