Balance Shaft: Service and Repair

Balance Shaft Assembly Overview

• It is only possible to remove the differential shaft when engine timing module has been removed beforehand. Refer to --> [ Engine Timing Module ] Engine Timing Module.





1 Thrust washer

2 Main bearing bolt

• Note tightening sequence and specification, refer to --> [ Tightening main bearing bolts ] Bearing Bracket.

3 Bearing cap bolt

• For differential shaft bearing.

• Note tightening sequence and specification, refer to --> [ Tightening main bearing bolts ] Bearing Bracket.

4 Bearing cap

• With eye for securing oil pump.

5 Bearing shell

6 Differential shaft

• Positioning, refer to --> [ Input shaft fits only in one position.
Rotate shaft so that the wide cut out in the hole aligns to the broad tooth
on the pin. ] Engine Timing Module.

7 Bearing shell

8 Thrust washer

9 Bearing cap

• Bearing cap with grooves for thrust washers.