Front Interior Lamp

Roof Trim Lamps and Switches


Front Interior Lamp

CAUTION!
When removing and installing components in visible area (switches, covers, trim, etc.), cover by taping the areas at which a prying tool (plastic wedge, screwdriver) will be positioned using commercially available adhesive tape.

Removing

- Switch off ignition, switch off all electrical consumers and remove ignition key.

- Carefully pry diffusion lens for Front Interior Lamp (W1) out of console in molded headliner - arrow -.





Bulb, replacing

- Push contact plate - 1 - of Front Interior Lamp (W1) in direction of - arrow - and remove bulb - 2 - from socket.





- Replace bulb (12V, 10 W).

Installing

Install in reverse order of removal.