Front Interior/Reading Lamp Button Module

Roof Trim Lamps and Switches


Front Interior/Reading Lamp Button Module

The button module consists of the following components:

• Front interior lamp button (E326)

• Driver's reading lamp button (E457)

• Front Passenger's Reading Lamp Button (E458)

CAUTION!
When removing and installing components in visible area (switches, covers, trim, etc.), cover by taping the areas at which a prying tool (plastic wedge, screwdriver) will be positioned using commercially available adhesive tape.

• Buttons cannot be replaced separately. If repairs are necessary, the entire button module must be replaced.

Removing

- Switch off ignition, switch off all electrical consumers and remove ignition key.

- Carefully pry cover out of console in molded headliner - arrow -.





- Carefully pry button module for interior reading lamp out of console in molded headliner - arrow -.





- Release and disconnect the connector - arrow -.





- Unclip both microphones of hands-free equipment.

- Disengage retaining tabs - arrows - and remove button module from frame.





Installing

Install in reverse order of removal.