Operation CHARM: Car repair manuals for everyone.

Tire Pressure Monitoring System, Generation 2






Tire Pressure Monitoring Control Module

The tire pressure monitoring control module (J502) is installed on the mounting bracket for the parking brake pedal.

Removing

- Remove driver's side footwell cover..

- Disconnect harness connector and remove tire pressure monitoring control module (J502) - arrow - from the mounting bracket for the parking brake pedal - 1 -.





Installing

Installation is the reverse of removal, with special attention to the following:

- Secure control module to the mounting bracket for the parking brake pedal using new expanding rivets.

- Code and calibrate control module.