Heated Glass Control Module: Service and Repair

Heated Windshield Control Module

Removing

- Switch off ignition, switch off all electrical consumers and remove ignition key.

- Swivel driver's seat toward the rear as described in the chapter " disconnecting battery" --> [ Battery, One-Battery Layout, Disconnecting and Connecting ] Battery, One-Battery Layout, Disconnecting and Connecting.

- Remove bolt - 1 - and pull off air vent - 2 - upward.





- Open battery box clips - arrows - and remove cover.





- Disengage retaining tab - 3 - and pull Heated Windshield Control Module (J505) - 2 - upward out of bracket, paying attention to lengths of connected wires.





- Disengage and disconnect harness connector - 1 - and remove Heated Windshield Control Module (J505) - 2 - from vehicle.

Installing

Install in reverse order of removal.