Dome Lamp Switch: Service and Repair

Button Module For Front Interior Reading Light, Removing And Installing

The button module consists of the following components:
- Front interior lamp button E326
- Drivers reading light button E457
- Front Passengers Reading Light Button E458

CAUTION: When removing and installing components in visible area (switches, covers, trim, etc.), cover by taping the areas at which a prying tool (plastic wedge, screwdriver) will be positioned using commercially available adhesive tape.

NOTE: Buttons cannot be replaced separately. If repairs are necessary, the entire button module must be replaced.

Removing:
- Switch off ignition, switch off all electrical components and remove ignition key.







- Carefully pry cover out of console in molded headliner - arrow -







- Carefully pry button module for interior reading light out of console in molded headliner arrow -.







- Release and disconnect the connector - arrow -.
- Unclip both microphones of hands-free equipment.







- Disengage retaining tabs - arrows - and remove button module from frame.

Installing:
Install in reverse order of removal.