Side Airbag Crash Sensors

Side Airbag Crash Sensors

• Removal and installation is described for the right-hand side of the vehicle. Removal and installation for the left-hand side is performed in the same manner.

Removing

CAUTION!
Observe safety precautions for working on airbags --> [ Airbag Safety Precautions ] Technician Safety Information.

- Remove belt anchor --> [ Belt Anchor ] Belt Anchor.

- Remove front seat:

• Remove seat --> [ Front Seat ] Front Seats.

- Remove seat base --> [ Seat Base ] Front Seats.

- Remove floor covering in area of side crash sensors.

- Remove the two bolts - 1 - (9 Nm).

- Disconnect the wiring harness - 3 - from the crash sensor - 2 -.





Installing

- Perform the steps used for removal in reverse order.

- Switch the ignition on.

CAUTION!
Make sure that no persons are in the vehicle.

- Connect battery ground (GND) strap.