Window Regulator

Front Door Windows


Window Regulator

Removing

- Remove front door trim.





- Remove the door window.

- Drill out the 4 pop rivets - 3 - on the window regulator - 1 -.

- Pry crank mechanism - 2 - out of the three locking tabs in assembly carrier.

- Remove window regulator - 1 - from window frame.

Installation

- When installing window regulator - 1 -, make sure that jacketed release - arrow - lies between window frame and unjacketed release.





- Clip - 4 - must be properly locked in assembly carrier before release is installed.

Then, continue in reverse order of removal.

• A function test must be performed before door trim is installed