Wiper Frame With Linkage and Windshield Wiper Motor, Installing

Windshield Wiper System

Wiper Frame with Linkage and Windshield Wiper Motor, Installing

• If a linkage with part number 7L0.955.601.B/ 602.B or higher is installed on a Touareg through MY 2007, the plenum chamber cover must be cut before installing --> [ Wiper Frame with Linkage, through 22.07 ]. Wiper Frame With Linkage, Through 22.07

CAUTION!
• When connecting battery, always perform work procedure as described in repair information --> [ Battery, One-Battery Layout, Disconnecting and Connecting ] Battery, One-Battery Layout, Disconnecting and Connecting. Not adhering to sequence will result in the deactivation of Main Battery Switch -E74- and subsequent damage to electrical system components.

• Observe notes for threaded connections of battery terminals --> [ Battery Post/Terminal ] Battery Post/Terminal.

- Reconnect battery --> [ Battery, One-Battery Layout, Disconnecting and Connecting ] Battery, One-Battery Layout, Disconnecting and Connecting.

- Let Windshield Wiper Motor (V) run to rest position, to do so, connect connector to Windshield Wiper Motor (V) and operate windshield wiper switch briefly to do so.

• Hood (Front Hood Switch (F266)) must be closed to activate windshield wiper functions.

- Install wiper frame with linkage and Windshield Wiper Motor (V) in reverse order of removal.

- Tighten the wiper arm M6 hex socket bolt to the specification given in the assembly overview --> [ Windshield Wiper System Assembly Overview ] Windshield Wiper System Assembly Overview.

• If Control Module for wiper motor (J400) or Windshield Wiper Motor (V) is replaced, Control Module for wiper motor (J400) must be coded --> [ Wiper Motor Control Module, Coding ] Testing and Inspection.