Glove Compartment Lamp

Instrument Panel Lamps and Switches


Glove Compartment Lamp

CAUTION!
When removing and installing components in visible area (switches, covers, trim, etc.), cover by taping the areas at which a prying tool (plastic wedge, screwdriver) will be positioned using commercially available adhesive tape.

Removing

- Switch off ignition, switch off all electrical consumers and remove ignition key.

- Carefully pry out Glove Compartment Lamp (W6) using a screwdriver.





- Release the connector and disconnect it.

Bulb, replacing

- Disengage retaining tabs - 1 - and remove heat shield - 2 - from diffusion lens of Glove Compartment Lamp (W6).





- Carefully pry bulb from socket.





- Replace bulb (12V, 5 W).

Installing

Install in reverse order of removal.