Glove Compartment Lamp Switch

Instrument Panel Lamps and Switches


Glove Compartment Lamp Switch

• The illustration shows Glove Compartment Lamp Switch (E26) - 1 - with instrument cluster removed. The instrument panel does not need to be removed in order to remove and install the switch.





• Glove Compartment Lamp Switch (E26) - 1 - can be reached starting from foot well and can be unclipped.

• The wire to Glove Compartment Lamp Switch (E26) - 1 - is long enough to pull the Glove Compartment Lamp Switch (E26) with wire connected into foot well and then to disconnect the harness connector.

Removing

- Unclip Glove Compartment Lamp Switch (E26) - 1 - with connected wire from bracket - arrows A -.

- Pull out Glove Compartment Lamp Switch (E26) - 1 - downward behind instrument cluster - arrow B - and disconnect harness connector.

Installing

Install in reverse order of removal.