Rear Reading Lamps

Roof Trim Lamps and Switches


Rear Reading Lamps

• Removal and installation for both rear reading lamps is performed in the same way and is only described for one reading lamp.

Removing

- Switch off ignition, switch off all electrical consumers and remove ignition key.

- Fold up cover - arrow -.





- Remove mounting bolt - arrow - and remove reading lamp.





- Release and disconnect the connector - arrow -.





Bulb, replacing

- Disengage retaining tab - arrow - and remove lamp carrier with switches from diffusion lens.





- Carefully remove bulb from socket.





- Replace bulb (12V, 5 W).

Installing

Install in reverse order of removal.