Fog Lamp

Fog Lamp

• Illustrations depict removal and installation at left fog lamp.

• Vehicles from 12/06, the form of the fog lamp cover cap has changed. The same procedure is used to remove and install the fog lamps.

Removing

- Switch off ignition, switch off all electrical consumers and remove ignition key.

- Release cover cap - 1 - from locking devices in - direction of arrow -.





- Release cover cap - 1 - in - direction of arrow - from locking devices and remove cover cap - 1 -.





- Remove screws - 2 -.





- Unscrew mounting bolt - 1 - above headlamp and remove washer - 2 -.





- Remove fog lamp housing from bumper and disconnect harness connector - arrow -.





Installing

Install in reverse order of removal, noting the following:

- Check headlamp for function.

- Check fog lamp adjustment and adjust if necessary.