General Information

General Information

CAUTION!
When doing any repair work, especially in the engine compartment, pay attention to the following due to clearance issues:

• Route all the various lines (e.g. for fuel, hydraulics, EVAP system, coolant, refrigerant, brake fluid and vacuum lines and hoses) and electrical wiring so that the original positions are restored.

• Ensure sufficient clearance to all moving or hot components.

• Hose connections are secured with either spring-type or clamp-type clips.

• Always replace clamp-type clips with spring-type clips.

• Fuel hoses at engine must only be secured with spring-type clips. The use of clamp or screw type clips is not permissible.

• Spring-type clip pliers (VAS 5024 A) or hose clip pliers (V.A.G 1921) are recommended for installing spring-type clips.





• The fuel system must be bled if the fuel delivery unit is replaced --> [ Fuel System, Bleeding ] Procedures.